Tools
190
Tools
5
Memory Full Procedure
If there is insufficient hard disk memory while scanning a document, a screen appears
asking you how you want to handle the partially stored data.
Set the process you want the machine to perform for the partially stored data after a
certain time has elapsed in the confirmation screen.
z
You can set the time until the memory full procedure is carried out. For more information, refer to "Machine Clock/Timers" (P.146).
îš„ Delete Job
Deletes the data partially stored.
îš„ Run Job
Treats the read-in data as valid, and start copying the document partially stored.
Maximum Stored Pages
Set the maximum number of pages stored for a copy document. You can set from 1 to 999
pages.
Auto Paper Off
Select the tray used when [Auto Select] of [Paper Supply] in the [Copy] screen is cancelled.
[Auto Select] of [Paper Supply] is cancelled when [Auto %], [Auto X-Y %] for [Independent
X-Y %], or [Slight Reduction (Improves Fit)] is selected.
Mixed Size Originals - 2 Sided Copy
Specify paper to copy side 2 of a document: in 2 sided copying, if the size of side 1 and side
2 of a document is different, and the machine detects different paper size for sides 1 and 2.
z
When the side 1 and side 2 are different sizes and if the side 2 is copied on the sheet on which the side 1 has
been printed, a part of the image may be missing.
îš„ Copy to new sheet
Side 2 is copied as side 1 on a new sheet of paper.
îš„ Copy to Side 2
Side 2 is copied on the reverse side of side 1 without changing paper size.
Fine-tune 100%
You can fine-tune magnification when copying at 100% (actual size). The set value is
applied to [100%] in the [Copy] screen is set to 100%.
Set the value in the X/Y direction between 98 and 102% in 0.1% increments.
z
This feature is applied only when a copy is made using the document glass. This setting is not reflected in the
magnification (100%) under [Independent X-Y%] or [Calculator %].
z
A magnification displays [100%] even if [Fine-tune 100%] is selected.
To Next Page
Loading...
Need help?
General
