Installation When Using TCP/IP (LPD/Port 9100)
343
Printer Environment Settings
7
CentreWare Internet Services Setting Items
You can configure the following setting items using CentreWare Internet Services:
z
For details on the setting items, click [Help] at the upper right corner of the CentreWare Internet Services screen to see help.
z
To display the online help for CentreWare Internet Services, users need to have the environment to connect
to the internet. The communication fee shall be borne by you.
z
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.330).
z
Spool Destination for Jobs
([Properties] > [General Setup] > [Memory Settings] > [LPD])
z
The spool destination can be configured when the LPD port is enabled.
z
Receiving buffer size for Port 9100
([Properties] > [General Setup] > [Memory Settings] > [Port 9100])
z
Port Settings
z
IP Mode
z
Host Name
z
IPv4
- IP Address Resolution
-Port Settings
- IP Address
-Subnet Mask
- Gateway Address
z
IPv6
- Enable Manual Address
- IP Address
- Link-Local Address
- Gateway Address
z
Domain Name
z
DNS Configuration
-IPv4
-IPv6
z
DHCP/DDNS
z
WINS Server
z
Port Number
z
TBCP Filter
z
The TBCP filter can be configured when the Adobe PostScript 3 Kit (optional) is installed.
z
Connection Time-Out
z
Maximum Number of Sessions
z
The Maximum Number of Sessions can be configured when the LPD port is enabled.
To Next Page
Loading...
Need help?
General
