Fuji Xerox DocuCentre-V C2263 Administrator's Guide

Before Using the Machine
28
Before Using the Machine
1
Auto Start
Select the check box to automatically switch the Warmer mode to [On] when condensation
continued for a specific period of time.
Auto Stop
Select the check box to automatically switch the Warmer mode to [Off] after a specified
period of absence of condensation has elapsed.
Note
z
If the power is off at the time specified in [Start Time], the machine will not enter the Warmer mode.
z
While the Warmer mode is enabled, the machine will not enter the Sleep mode and prevents or reduces
condensation.
z
[Auto Start] allows you to automatically enable the Warmer mode when the machine detects condensation
in future years.
8 Select [Save].
9 Select [Close] repeatedly until the Services Home screen is displayed.
Note
z
When you configure settings under [System Settings] or [Setup] and then press the <Services Home> button,
the screen directly goes back to the Services Home screen.

Fuji Xerox DocuCentre-V C2263 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Memory (Standard)	1GB
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Paper Size	A4, A5, B5
Hard Disk Drive	160 GB