Printer Environment Settings
336
Printer Environment Settings
7
Print Overview
This machine can be set up as a local printer by directly connecting the machine to a
computer using a USB interface cable. Similarly, it can be set up as a network printer by
connecting the machine to a network.
Enable the necessary port using the control panel or CentreWare Internet Services.
z
This feature does not appear for some models. For such models, an optional component is required. For more
information, contact our Customer Support Center.
z
The print drivers are contained in the Media (Software/Product Manual). For information on the driver
installation procedures, refer to the manual contained in the Media (Software/Product Manual).
z
You can download the latest print driver from our web site.
Using the Machine as a Local Printer
îš„ USB
Use a USB interface cable to directly connect the machine to a computer.
z
For more information on how to set up the machine using USB connection, refer to "Installation When Using USB Port" (P.338).
Using the Machine as a Network Printer
To set up the machine as a network printer, the following protocols are available to connect
the machine.
îš„ LPD
Use LPD when direct communication between the machine and a computer via TCP/IP is
available.
z
For more information on how to set up the machine using LPD, refer to "Installation When Using TCP/IP (LPD/Port 9100)" (P.341).
Via Internet IPP
Network Connection
LPD/SMB/Port9100
Local connection USB
Server
To Next Page
Loading...
Need help?
General
