z
Select a submenu from the [Group] list, and then select a feature from the [Features] list.
z
Select[ ]or[ ]as required.
2
Select an item to set.
3
After setting the feature, select [Save].
4
Select [Close] repeatedly until the Services Home screen is displayed.
z
If rebooting the machine is required to enable the new settings, when you select [Close] in the [Tools] screen,
a message may be displayed. Follow the message and reboot the machine. After the machine reboots, it exits
from the System Administration mode, and the <Log In/Out> button is unlit.
z
When you configure settings under [System Settings] or [Setup] and then press the <Services Home> button,
the screen directly goes back to the Services Home screen.
Step 6 Exiting System Administration Mode
1
Press the <Log In/Out> button.
z
You can also log out by pressing the login information field on the touch screen, and then selecting [Logout].
z
The <Log In/Out> button is unlit when the machine exits from the system administration mode.
To Next Page
Loading...
Need help?
General
