Tools
182
Tools
5
Copy Service Settings
In [Copy Service Settings], you can configure settings related to the Copy feature. The
following shows the reference section for each procedure.
"Copy Tab - Features Allocation" (P.182)
"Preset Buttons" (P.183)
"Copy Defaults" (P.183)
"Copy Control" (P.189)
"Original Size Defaults" (P.192)
"Reduce/Enlarge Presets" (P.192)
"Custom Colors" (P.193)
"Annotations - Create Comments" (P.193)
1
On the [Tools] screen, select [System Settings] > [Copy Service Settings].
z
For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.138).
2
Select an item to set or change.
Copy Tab - Features Allocation
You can customize the features displayed on the [Copy] screen. Setting the most frequently
used features enables you to avoid extra operations such as selecting tabs.
1
Select the number of features displayed on the [Copy] screen.
îš„5 Features
The following five features are shown on the screen: [Output Color], [Reduce/Enlarge],
[Paper Supply], [2 Sided Copying], and [Copy Output]. Features and positions displayed
cannot be changed.
îš„7 Features
Allows you to set features appearing in the fourth column from the left of the [Copy]
screen.
To Next Page
Loading...
Need help?
General
