EasyManuals Logo

Fuji Xerox DocuCentre-V C2263 Administrator's Guide

Fuji Xerox DocuCentre-V C2263
771 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #187 background imageLoading...
Page #187 background image
Copy Service Settings
187
Tools
5
Edge Erase - Right Edge
When you copy a document with the document cover open or when you copy a book, the
edges and center margin of the document may be printed as black shadows. This feature
allows you to erase such shadows on the right edge.
Set the default value for the amount of edge erased from the original in the right directions
in [Edge Erase] in the [Layout Adjustment] screen. Set the value from 0 to 50 mm in 1 mm
increments.
Note
z
You cannot copy the whole area even if you set [0] to [Edge Erase - Right Edge]. For the printable area, refer
to "Printable Area" (P.646).
Center Erase/Binding Edge Erase
When you copy a document with the document cover open or when you copy a book, the
edges and center margin of the document may be printed as black shadows. This feature
allows you to erase such shadows on the center of facing pages of a bound document or a
booklet.
Set the default value for [Center] in [Edge Erase] in the [Layout Adjustment] screen. Set the
value from 0 to 50 mm in 1 mm increments.
Note
z
You cannot copy the whole area even if you set [0] to [Center Erase/Binding Edge Erase]. For the printable
area, refer to "Printable Area" (P.646).
Edge Erase - 2 Sided Original - Side 2
This feature allows you to set whether the edge erase value of Side 1 and Side 2 are to be
same or to be symmetrical.
Image Shift - Side 1
Set the default value for [Side 1] of [Image Shift] in the [Layout Adjustment] screen.
Image Shift - Side 2
Set the default value for [Side 2] of [Image Shift] in the [Layout Adjustment] screen.
Image Rotation
Set the default value for [Image Rotation] in the [Layout Adjustment] screen.
Image Rotation - Rotation Direction
Set the default value for [Image Rotation - Rotation Direction] of [Image Rotation] in the
[Layout Adjustment] screen.
Original Orientation
Set the default value for [Original Orientation] in the [Layout Adjustment] screen.
Pages per Side
Set the default value for [Pages per Side] in the [Copy] and [Output Format] screens.

Table of Contents

Other manuals for Fuji Xerox DocuCentre-V C2263

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-V C2263 and is the answer not in the manual?

Fuji Xerox DocuCentre-V C2263 Specifications

General IconGeneral
Print Resolution1200 x 2400 dpi
Scan Resolution600 x 600 dpi
FunctionsPrint, Copy, Scan, Fax
Memory (Standard)1GB
Duplex PrintingYes
Fax Transmission Speed33.6 kbps
Supported Operating SystemsWindows, Mac OS, Linux
ConnectivityUSB 2.0, Ethernet
Paper SizeA4, A5, B5
Hard Disk Drive160 GB

Related product manuals