Fuji Xerox DocuCentre-V C2263 Administrator's Guide

Before Using the Machine
36
Before Using the Machine
1
5 Select [Services Home], and then select [Change Settings].
Note
z
Select[ ]to display the previous screen or[ ]to display the next screen.
6 Select the position where you want to assign a service.
Note
z
Select[ ]to display the previous screen or[ ]to display the next screen.
z
The layout of the buttons in this screen corresponds to the layout of those on the Services Home screen.
7 Select a service you want to display on the Services Home screen.
Note
z
Select[ ]to display the previous screen or[ ]to display the next screen.
z
You cannot assign the same feature to more than one button.
8 Select [Save].
9 Select [Save].
Services Home - Additional Features
You can select additional feature buttons, which are displayed on the Services Home
screen.
If you select [(Not Assigned)], the position of the selected button becomes blank.
You cannot assign [Setup] to [(Not Assigned)]. If you do not want to display the [Setup]
button, select the [Show this in Admin mode] check box.

Fuji Xerox DocuCentre-V C2263 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Memory (Standard)	1GB
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Paper Size	A4, A5, B5
Hard Disk Drive	160 GB