Configuration of HTTP Communications Encryption
411
Encryption and Digital Signature Settings
13
îš„ How to create the self-signed certificate (for SSL server)
1
Start CentreWare Internet Services.
z
For more information on how to start CentreWare Internet Service, refer to "Starting CentreWare Internet Services" (P.330).
2
Create a certificate.
1) Click the [Properties] tab.
2) Click [Security] to display the items in the folder.
3) Click [Machine Digital Certificate Management].
4) Click the [Create New Certificate] button.
5) Select [Self-Signed Certificate] and then click the [Continue] button.
6) Set [Digital Signature Algorithm] as necessary.
7) Set [Public Key Size] as necessary.
8) Set [Issuer] as necessary.
9) Set [Days of Validity] as necessary.
10)Click [Apply].
11)Refresh the web browser.
3
Set up the SSL/TLS information.
1) Click [Security] to display the items in the folder.
2) Click [SSL/TLS Settings].
3) Select the [Enabled] check box for [HTTP - SSL/TLS Communication].
z
The check box can be selected only when the certificate for the SSL server is correctly set. When the check box
cannot be selected, check [Properties] > [Security] > [Certificate Settings], and make the correct settings for
the certificate for the SSL server.
4) Set up [HTTP - SSL/TLS Communication Port Number].
z
Do not use the numbers of any other ports.
5) Click [Apply]
6) When the right frame of the web browser changes to the machine reboot display, click
[Reboot Machine]. The machine reboots and the settings are enabled.
îš„ How to import the certificate issued by another CA
Before importing the certificate issued by another CA, create the self-signed certificate and
make the settings so that HTTP communication is encrypted.
To Next Page
Loading...
Need help?
General
