Problem Solving
480
Problem Solving
15
The one-page
document is
received split
into multiple
pages.
When scanned on the
sender's machine, the
document was enlarged
for some reason.
You can set the machine to process such a
document by using the Auto Reduce on
Receipt feature and a border limit value
for page splitting. According to the setting
combination specified, the received
document is printed as follows:
z
Refer to "Border Limit" (P.251), or "Auto Reduce
On Receipt" (P.251).
Although the
Folder Selector
feature is set,
however, the
received
document is
printed, and
cannot be stored
in the folder.
An unregistered folder is
specified on the Folder
Selector feature.
When using the Folder Selector feature,
specify a registered folder. If an
unregistered folder is selected, the
received document cannot be stored in
the folder, and will be automatically
printed.
z
For information on how to register the folder, refer
to "Create Folder" (P.276). For information on the
setting of the Folder Selector, refer to "Fax
Received Options" (P.255).
Symptom Cause Remedy
Auto
Reduce on
Receipt ON
Auto
Reduceon
Receipt
OFF
Within
border limit
Automatic
ally
reduces
image size
and prints
it on one
page.
Trims the
portion
exceeding
standard
siz e and
then prints.
Exceeding
border limit
Splits data
at equal
ratio and
prints.
-
To Next Page
Loading...
Need help?
General
