Appendix
712
Appendix
16
the machine may misidentify the binary data as protocol data; therefore, the output of text
data may extend for multiple pages.
In this case, select [RAW] for [Adobe Communication Protocol] under [Tools] > [System
Settings] > [Connectivity & Network Setup] > [Port Settings] > [USB] to properly print data
which includes EPS files with binary data.
îš„ Text and Photos for Media Print
You can use a commercially available single-slot memory card reader, but the operation is
not guaranteed. When you use a multi-slot memory card reader, only one of those slots can
be recognized. The slot to be used differs depending on the card readers. Some of the
media and slots of memory card readers may not be used on the machine, and the
operation is not guaranteed.
îš„ Thumbnail for Media Print
The Media Print - Photos feature supports Thumbnail view but not Preview. The Media Print
- Text feature supports neither Thumbnail view nor Preview.
îš„ Print Jobs while the Control Panel is being Operated
The processing and output speeds of print jobs may slow in the following conditions:
z
The control panel is being operated while the machine processes a print job.
z
The status of a print job is being viewed in the [Job Status] screen.
îš„ When the Print Results Differ from the Settings
As in the following cases, insufficient memory for the print page buffer may cause print
result in not printing as specified. In this case, we recommend that you increase the
memory.
z
Printed only on 1 side when 2 sided printing is specified.
z
A job was terminated (If data cannot be written to the print page buffer, the job
including that page is terminated).
îš„ Direct Print via USB Host (a USB memory device)
When the machine is in the Sleep mode, your computer does not detect the machine if you
connect a USB memory device to the machine. Exit the Sleep mode, and thenconnect the
USB memory device and send a print job.
îš„ Printing from a USB Memory Device
z
To print from a USB memory device, the USB Memory Kit (optional) is required.
z
Use USB 2.0 compliant memory devices only.
The following USB memory devices are not supported:
- A USB memory device with multiple media partitions that require other utilities to
access to the contents therein.
- A USB memory device connected via an external hub.
z
Multiple USB memory devices cannot be used simultaneously.
z
The machine does not display a menu to prevent you from removing a USB memory
device while it is being accessed.
To Next Page
Loading...
Need help?
General
