Fuji Xerox DocuCentre-V C2263

Replacing Consumables
85
Maintenance
3
4 Clean each of the LED printheads once with the cleaning bar on the back side of the front
cover. Insert the cleaning bar into each slot until it stops, and then slowly slide the bar back
out.
5 After cleaning the LED printheads, attach the new cleaning bar to the back side of the front
cover.
Important
z
When inserting the waste toner container, do not grip the handle of the container.
6 Align the dents at the bottom of the waste toner container with the tabs on the machine.
7 Raise the waste toner container toward the inside of the machine until it clicks into place,
and then turn the lock lever clockwise to lock the waste toner container.