Replacing Consumables
95
Maintenance
3
1
Pull up the knob on the document feeder top cover, and open the document feeder top
cover completely.
2
Pull up the lever to open the inner cover.
3
Stick the supplied pin into the old stamp cartridge, and pull it straight out of the machine.
z
If only the sponge part of the stamp cartridge is removed, make sure of removing the bottom part of the
cartridge.
4
Insert the new stamp cartridge.
5
Close the inner cover of the document feeder.
6
Close the left cover of the document feeder until it clicks into place, and confirm that there
is no space between the near or far side of the cover and the document feeder.
To Next Page
Loading...
