4.2 Loading Paper 111
.5. Squeezing the right side guide with your
fingers, adjust it to the paper size.
Important
• Adjust the side guides correctly to the width of the
paper. If the paper guides are not adjusted correctly,
the printer may not correctly detect the size of the
loaded paper.Also, the paper may not be fed properly,
which can cause paper jams.
6. Neatly align the edges of the paper sheets
and load then with the print side facing up.
At this time, make sure that the paper does
not extend higher than the side guides.
Important
• Do not use creased or wrinkled paper.
• Do not load paper above the maximum fill-line.
7. Change the paper size label according to
the loaded paper.
Note
• When facing the front of the printer, the orientation of
the paper is " " when the paper is oriented vertically
when loaded, and " " when the paper is oriented
horizontally when loaded. The illustration is for when
B5 size paper " " has been loaded.
8. Close the cover of the paper tray.
Important
• Be sure to close the cover of the paper tray to protect
the paper from dust and humidity.
9. Firmly push the paper tray all the way back
into the printer.
To Next Page
Loading...
Need help?
General
