5.2 Common Menus Setting 169
Receive
Control
Sets how received print jobs are handled.
• [ReferPrintAuditron] (default)
• [PrivateChargePrint]
Saves jobs with User IDs to private charge print regardless of whether
or not the authentication feature is used.
• [Save in ChargePrint]
Saves all received jobs to charge print regardless of whether or not
the authentication feature is used.
Important
• When [Save in ChargePrint] is set, all print jobs are saved even if
authentication succeeds or fails. To prevent unwanted print jobs from
building up, either set up automatic deletion or manually delete print
jobs that have exceeded their storage period set under [Job Expiry
Date]. For more information on how to set the storage period, refer to
“[Stored Jobs]” (P. 170).
Note
• This item appears only when IC Card Reader (optional or purchase
separately) is installed. The IC Card Reader may not be supplied with
the printer in some regions. Contact your dealer for details.
• When [PrivateChargePrint] and [Save inChargePrint] are set, secure
print, sample set or delayed print are ignored even if you specify them
on the print driver.
Process
Job Login
Sets the processing method when a print job is received.
[Job Login Success]
Sets the processing method when successfully authenticated jobs are
received.
• [Print Job] (default)
Print jobs are printed.
• [PrivateChargePrint]
Print jobs are saved to Private Charge Print.
[Job Login Failure]
Sets the processing method when failed authentication jobs are
received.
• [Save in ChargePrint]
• [Delete Job] (default)
[Without User ID]
Sets the processing method when a print job without a User ID is
received.
• [Print Job]
• [Save in ChargePrint]
• [Delete Job] (default)
Note
• This item appears only when IC Card Reader (optional or purchase
separately) is installed. The IC Card Reader may not be supplied with
the printer in some regions. Contact your dealer for details.
Setting Description
To Next Page
Loading...
Need help?
General
