5.2 Common Menus Setting 177
[PaperTrayPriority]
Setting Description
Plain, Plain S2,
Recycled,
1. Custom 1 to
5. Custom 5
This setting will be used by the Auto Tray Selection feature. Defaults are as
follows: Plain=[1], Recycled=[2]. Otherwise, the default is [Auto Paper Off].
• [1] to [8]
Sets the priority order of paper types.
• [Auto Paper Off]
Does not set the priority order of paper types. In this case, the Auto Tray
Selection feature is not used.
Note
• [1. Custom 1] to [5. Custom 5] display the names specified under [Custom
Paper Name].
• You can assign the same priority order to different paper types. In this case,
the printer selects a tray based on the [Paper Tray Priority] setting.
Printer Settings
PaperTrayPriority
PaperTrayPriority
Tray 1
PaperTrayPriority
Tray 2
PaperTrayPriority
Tray 3
PaperTrayPriority
Bypass Tray
Setting Description
Tray 1 to Tray 3
Bypass Tray
Sets the priority order of the paper trays. This setting will be used by the Auto
Tray Selection feature. Defaults are as follows: Tray 1=[1], Tray 2=[2], Tray
3=[3] and [No AutoTraySwitch].
•[1] to [3]
Sets the priority order of the paper trays.
[No AutoTraySwitch]
Does not set the priority order of paper types. In this case, the Auto Tray
Selection feature is not used.
Note
• Tray 2 to Tray 3 are optional. The display only shows the trays that are
actually installed on the printer.
• You cannot assign the same priority to more than one tray. If the same
priority order of other trays are specified, a priority order other than the
specified tray is automatically changed.
• Only the lowest priority can be set for Bypass Tray.
To Next Page
Loading...
