178 5 Control Panel Settings
[PaperSizeSettings]
Printer Settings
PaperSizeSettings
PaperSizeSettings
Tray 1
PaperSizeSettings
Tray 2
PaperSizeSettings
Tray 3
PaperSizeSettings
Bypass Tray
Setting Description
Tray 1 to Tray 3 Sets the paper size of the paper loaded in each paper tray.
• [Auto] (default for Tray 1 to Tray 3)
The sensor automatically detects the paper size.
•[Custom]
Sets the length and width of the paper.
When [Custom] is selected, set the print orientation to [Portrait (Y) Size] or
[Landscape (X) Size].
Note
• Tray 2 to Tray 3 are optional. The display only shows the trays that are
actually installed on the printer.
• For details on how to set custom paper sizes, refer to “Setting the Paper
Sizes of Trays” (P. 115).
• [Tray 3] is not displayed if [No AutoSwitchOff] is specified in [Paper Tray
Priority] > [Tray3].
Bypass Tray Set the paper sizes of the various trays.
A3 , A4 ,A4 ,A5 , B4 , B5 , 5.5 x 8.5"
7.25 x 10.5" , 8.5 x 11" , 8.5 x 13" , 8.5 x 14" , 11 x 17" ,
Postcard (100 x 148) , Postcard (148 x 200 ),
Envelope (120 x 235mm) , No.10 Env.
Monarch , DL Env. , C5 Env. ,
105x235"
•[Custom]
Set the desired vertical direction size and horizontal direction size. For this
purpose, use [Vertical (Y) direction size] and [Horizontal (X) direction size]
displayed when [Custom] is selected.
Note
• Regarding the setting procedure for custom sizes, refer to "“ Setting the
Paper Sizes of Trays” (P. 115)
• [Bypass Tray] is not displayed when [No AutoSwitchOff] is selected in
[Bypass Tray] under [Paper Tray Priority].
To Next Page
Loading...
