7.1 Replacing Consumables 249
16. Repositioning your hands to grasp the
indentations on both sides of the bypass
tray, push the bypass tray all the way back
into the printer.
17. Close the bypass tray.
18. Switch on the power of the printer by
pressing the <|> side of the power switch.
Resetting the Counter
After replacing the Bypass Feed Roller unit, perform the required control panel operations
to reset their respective counters.
When replacing the Bypass Feed Roller unit, be sure to reset the counter on the control
panel.
1. On the control panel, press the < > and
<OK> buttons at the same time.
This displays the [Consumables Menu].
2. Press the < > until [Reset Counter]
appears.
3. Press either the < > or <OK> button to
select so [Fuser Assembly] is displayed.
4. Press the < > until [Bypass FeedRoller]
appears.
Consumables Menu
Serial number...
Consumables Menu
Reset Counter
Reset Counter
Fuser Assembly
Reset Counter
Bypass Feed Roller