314 7 Maintenance
Cleaning the Paper Feed Rollers and Nudger Rollers of the Paper Tray 3
(Option)
1. Lift the paper feeder of the optional Tray 2
with your left hand (1), and gently wipe
surface of the rubber rollers with a soft
damp cloth while rotating little by little each
of the rollers.
Cleaning the Bypass Feed Roller and Bypass Retard Roller
Feeding of illustrated postcards and dusty papers may cause paper feed malfunction, by
adhering the image show-through prevention powder and the paper dust to the bypass feed
roller and/or the bypass retard roller. When paper feed becomes unreliable, try to
thoroughly wipe each of surfaces of the bypass feed roller and the bypass retard rollers with
a soft damp cloth, by following procedure described below.
1. Open the bypass tray.
2. Grasping the indentations on both sides of
the bypass tray, pull out the tray up to the
position where it stops.
3. Reposition your hands as shown in the
illustration and pull up the bypass tray at an
angle.
To Next Page
Loading...
Need help?
General
