Fuji Xerox DocuPrint 3105 User Manual

3.12 Printing Using E-mail - E-mail Print - 97
Services >
E-mail >
Defaults >
From
Address >
Edit
Receiving
Protocol
Specify the e-mail receiving
protocol.
•SMTP
•POP3*
 -
Incoming
E-mail Print
Options
Configure this setting when
printing the e-mail header
and message along with the
document attached to
received e-mail. Specify
[Attachment, Full Headers &
Message] to print the receive
routing of the e-mail, etc.
•Print
Attachment
Only
•Print
Attachment
& Message if
it exists
• Attachment,
Basic
Headers &
Message*
• Attachment,
Full Headers
& Message

Print Delivery
Confirmation
E-mail
Specify whether or not
delivery receipt e-mail
should be printed.
•Off*
•On
• Print when
delivery fails

Connectivity >
Protocols >
POP3 Setup
IP Address /
Host Name &
Port
Specify the IP address of the
POP3 server for receiving e-
mail, the IPv6-addr format,
or FQDN (Fully Qualified
Domain Name).
Specify the port number
used by the POP3 server.
Alphanumeric
characters plus
period (.) and
hyphen (-); up
to 128 bytes
1 ~ 65535
- 
POP Receive
Password
Encryption
Select the [APOP
Authentication] check box to
use APOP for POP receive
verification.
• Cleared:
Disabled*
• Selected:
Enabled
- 
Login Name Set the login user name for the
POP3 server. Only one user
can be specified.
ASCII graphic
characters
(codes 33 to
126); up to 64
bytes
- 
Password Specify the password for the
POP user name, and re-enter
the same password into
[Retype Password].
ASCII printable
characters
(ASCII graphic
characters plus
space; codes
32 to 126); up
to 64 bytes
--
Polling
Interval
Specify the interval for
polling the POP3 server for
mail.
1 to 120
minutes
10 minutes*
- 
Item Setting Description Available
Settings
Receiving
Protocol
SMTP POP3

Fuji Xerox DocuPrint 3105 Specifications

General

Brand	Fuji Xerox
Model	DocuPrint 3105
Category	Printer
Language	English