Home > Introduction to Your Fuji Xerox Machine > Before Using Your Machine
Before Using Your Machine
Before attempting any printing operation, confirm the following:
• Make sure you have installed the Fuji Xerox software and drivers.
• For USB or network cable users: Make sure the interface cable is physically secure.
Simultaneous printing, scanning and faxing
Your machine can print from your computer while sending or receiving a fax into memory or while scanning a
document into the computer. Fax sending will not be stopped during printing from your computer. However, when
the machine is copying or receiving a fax on paper, it pauses the printing operation, and then continues printing
when copying or fax receiving has finished.
Firewall (Windows
®
)
If your computer is protected by a firewall and you are unable to network print, network scan, or PC-FAX, you
may need to configure the firewall settings. If you are using the Windows
®
Firewall and you installed the Fuji
Xerox software and drivers from the Fuji Xerox installation disc, the necessary firewall settings have already
been set. If you are using any other personal firewall software, see the User's Guide for your software or contact
the software manufacturer.
Related Information
• Introduction to Your Fuji Xerox Machine
6
To Next Page
Loading...
Need help?
General
