Home > Network > Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless
Network > Use Wi-Fi Direct
®
> Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network
Using the One-Push Method
Configure Your Wi-Fi Direct Network Using the One-Push Method
Related Models: DocuPrint M375 z
If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network.
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi
Direct connection request received. Press [OK] to connect.] will appear on the LCD.
Press [OK] to connect.
1. Press [ ] [Settings] > [All Settings] > [Network] > [Wi-Fi Direct] > [Push Button].
2. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
[Activate Wi-Fi Direct on other device. Then Press [OK].] appears on the machine's
LCD. Press [OK] on your machine.
This will start the Wi-Fi Direct setup. To cancel, press
.
3. Do one of the following:
• When your Fuji Xerox machine is the Group Owner (G/O), connect your mobile device to the machine
directly.
• When your Fuji Xerox machine is not the G/O, it displays available device names with which to configure
a Wi-Fi Direct network. Select the mobile device you want to connect to. Search for available devices
again by pressing [Rescan].
4. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup.
Related Information
• Configure Your Wi-Fi Direct Network
Related Topics
• Wi-Fi Direct Network Configuration Overview
325
To Next Page
Loading...
Need help?
General
