119
5.2 How to check and reset the Consumables Counter
5
REPLACEMENT OF CONSUMABLES
■ Resetting of the consumable counters
Reset the consumable counter(s) every time you replace the consumable(s), following the procedure given
below.
1. Click the [Clear] button beside the replaced consumable.
2. Click the [OK] button on the displayed confirmation message.
⇒ The value of the counter will be reset to “0”. (“100”, in case of “Remaining Ink”).
3. To close the window of the [Software Operation Panel], click the [OK]
button.
To Next Page
Loading...
Need help?
General