Fujitsu 5900C - fi - Document Scanner User Manual

36
2.12 Feeding Documents Manually
3. Start the application and display the scanner driver screen.
Set the scanning condition.
For the information about how to run the scanner driver, refer to “2.10 Scanning Documents”
on page 30.
4. Start scanning.
When using the TWAIN driver, click the [Scan] button on the following screen.
5. Load the documents towards the back of the hopper.
When more than one sheet is loaded, only the one on the top of the stack will be fed.
The document is picked up and ejected onto the stacker after scanning.

Fujitsu 5900C - fi - Document Scanner Specifications

General

Brand	Fujitsu
Model	5900C - fi - Document Scanner
Category	Scanner
Language	English