Fujitsu 5900C - fi - Document Scanner User Manual

173
8.3 Offset/Scan scale
8
SCANNER SETTINGS
8.3 Offset/Scan scale
When the position of the scanned image is not correct or the image is elongated, use the following proce-
dure to adjust the Offset and the Scan scale for correction.
1. Start up the Software Operation Panel.
Refer to “8.1 Scanner Settings” on page 166.
2. Click the [Offset] button on the [Device setting] tab.
ATTENTION
The factory default setting are appropriate, so normally there is no need to
make any adjustment.

Fujitsu 5900C - fi - Document Scanner Specifications

General

Brand	Fujitsu
Model	5900C - fi - Document Scanner
Category	Scanner
Language	English