Fujitsu 5900C - fi - Document Scanner User Manual

172
8.2 Power saving setting
8.2 Power saving setting
When not using this scanner for a certain time, it will enter automatically the power saving mode.
Configure the Power saving mode as follows:
1. Start up the Software Operation Panel.
Refer to “8.1 Scanner Settings” on page 166.
2. Select the [Device Setting] tab.
3. Use the slide control bar to set the waiting time before entering the power
saving mode.
Setting range 5 - 60 minutes. (Set in steps of 5 minutes)

Fujitsu 5900C - fi - Document Scanner Specifications

General

Brand	Fujitsu
Model	5900C - fi - Document Scanner
Category	Scanner
Language	English