70
3.1 Double Sided Scanning
3.1 Double Sided Scanning
When you want both sides of a document to be scanned at the same time, set the feeding option to
“Duplex”.
Below is the procedure with TWAIN driver.
1. Set the document on the hopper.
Refer to section “2.6 Loading Documents on the Hopper” on page 17.
2. Adjust stacker in accordance with document size.
Refer to section “2.7 Setting up the Stacker” on page 22.
3. Start TWAIN driver with the application used.
Refer to section “2.13 How to use the Scanner Driver” on page 41.
4. Set the [Scan Type:] to “ADF (Duplex)”.
5. Set resolution and document size and so on, and then click [Scan] button.
To Next Page
Loading...
