37
2.12 Feeding Documents Manually
2
BASIC SCANNER OPERATIONS
6. Repeat the procedure 5 until all the documents are scanned.
After a certain time period of inactivity, the scanner will automatically recognize it as “no
document” and stop scanning.
7. To deactivate “Manual Feed Mode” (Single Feed), return the Pick roller
unit to its original position.
Flip down the small plate on the left using your finger.
HINT
For setting the timeout for feeding the document manually, refer to section
“8.17 Timeout for Manual Feeding” on page 193.
Pick Roller Unit
To Next Page
Loading...
