Fujitsu 5900C - fi - Document Scanner

16
2.5 Setting the Hopper Height
The adjustment is done by using the Operator Panel on the scanner.
When you press the
 button, the hopper is raised one step higher.(LowMiddle High)
When pressing the
 button, the hopper is lowered one step lower.(HighMiddle Low)
HINT
Immediately after the scanner is turned on, the Hopper is initially set to Low.
Send to
S
can
Pow
er T
hi
ck
n
e
ss
Hop
per
He
igh
t
Function
Thi
ck
Thi
n
Function
Hopper Height
Paper Thickness
Thin
Send to Scan
Thick