21
2.6 Loading Documents on the Hopper
2
BASIC SCANNER OPERATIONS
5. Start the scanner application and scan the document.
For the details on how to scan using ScandAll 21, refer to “2.10 Scanning Documents” on
page 30
ATTENTION
Make sure that all the pages fall under the pick roller. (Otherwise they will
not be picked.).
HINT
If you want to unlock side guides, follow the steps below:
• Release the locked side guide by flipping down the switch.
• Move both side guides toward the center while pressing the lock lever.
• Release the lever.
⇒ Now the two sides will move symmetrically as before.
Pick roller
Unlocked!
Lock Switch
ロックスイッチ
Lock Lever
To Next Page
Loading...
Need help?
General