24
2.7 Setting up the Stacker
■ Switching the stacker’s inclination
<Switching to the tilting forward setting>
1. Slide the stacker out towards you.
2. Push down the part of the stacker which is closer to you.
⇒ The stacker inclines towards you.
3. Move your hands away from the stacker slowly.
Bottom edge alignment by
horizontal stacker setting
Leading edge alignment by
tilting forward setting of
stacker
後端揃え
先端揃え
Ԙ
Ԙ
ԙ
ԙ
To Next Page
Loading...
