45
2.13 How to use the Scanner Driver
2
BASIC SCANNER OPERATIONS
Image Mode
Specifies the image type for the scanned documents.
[Scan] button
Starts scanning documents with the current settings.
[Preview] button
Documents are scanned preliminarily before the actual scanning.
You can confirm the image of the documents in the preview window.
[Close] button
Saves the current settings and closes this window.
[Reset] button
Used to undo changes of settings.
[Help] button
Opens the “FUJITSU TWAIN32 Scanner Driver Help” window. The window also opens by
pushing the [F1] key.
[About...] button
Opens an information window about the FUJITSU TWAIN32 Scanner Driver's version.
Black & White Documents are scanned in binary (black and white).
Halftone Documents are scanned with halftone processing in black and white.
Gray scale Documents are scanned in gradations from black to white. For this
mode you can select 256 gradations or 4 bit (16 gradations).
Color Documents are scanned in color. For this mode, you can select 24 bit
Color, 256 bit Color or 8bit Color.
To Next Page
Loading...
Need help?
General