63
2.13 How to use the Scanner Driver
2
BASIC SCANNER OPERATIONS
Counter
Specifies the rule of display.
Initial Value: You can specify the initial vale.
Field Width: You can specify the number of digits for the counter.
Number Control: You can specify the number by which the counter is
incriminated/decremented.
Top Margin:
Specifies the location where the printed string of characters starts.
Setting range: 0.5 to 10.5 in.(1.27 to 26.7cm)
Minimum unit: 0.1 in.(0.01cm)
Units:
Selects a unit for Top Margin values i(nch, cm, or pixel).
Font:
Selects the font to use for printing (Normal, Bold, or Narrow).
Rotation:
Specifies the orientation of strings of characters.
To Next Page
Loading...
