EasyManua.ls Logo

Fujitsu ETERNUS DX100 S3 - Figure 65 Compression Overview; Table 39 Deduplication;Compression Function Specifications

Fujitsu ETERNUS DX100 S3
207 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Compression Function
This function compresses each data block and stores the data.
Figure 65 Compression Overview
A B C D A B E F
Business server 2
Target volume for compression
A B C D
Data 1
Business server 1
Data 2
A B E F
Data 1 is
written
Data 2 is
written
Compression
Data blocks are
compressed
ETERNUS DX
A B E FA B C D
The following table provides the function specifications for the Deduplication/Compression.
Table 39 Deduplication/Compression Function Specifications
Model ETERNUS DX200 S4/DX200 S3
Number of TPPs available for Deduplication/Compres-
sion settings
4
The maximum logical ca-
pacity that can be a dedu-
plication/compression tar-
get (*1)
When one pool has one
RAID group
Up to five times the DEDUP_SYS Volume (*2)
When one pool has two or
more RAID groups
Up to ten times the DEDUP_SYS Volume (*2)
Logical capacity of the DEDUP_SYS Volume (*3) Expandable from 8TB (default) to 128TB (maximum)
Logical capacity of the DEDUP_MAP Volume (*3) Fixed (5,641,339MB)
Volume type TPV ¡ (*4)
Standard / FTV / WSV /
SDV / SDPV / VVOL / ODX
´
*1 : To perform an efficient load balance of the Deduplication/Compression process, configuring
two or more RAID groups per pool is recommended.
*2: If a Deduplication/Compression Volume is created or expanded, expand the DEDUP_SYS Vol-
ume according to the total capacity of the Deduplication/Compression Volumes. If the effi-
ciency of the Deduplication/Compression function cannot be estimated, the recommended
total capacity of Deduplication/Compression Volumes is a capacity smaller than the logical ca-
pacity of the DEDUP_SYS Volume.
*3: The Deduplication/Compression function can create Deduplication/Compression Volumes
whose capacity is equal to or larger than a DEDUP_SYS Volume. In environments where dedu-
plication/compression is not effective, a write operation to the Deduplication/Compression
Volume may fail due to a capacity shortage of the DEDUP_SYS Volume.
3. SAN Functions
Operations Optimization (Deduplication/Compression)
112
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems
Design Guide (Basic)
Copyright 2023 Fujitsu Limited
P3AM-7642-32ENZ0

Table of Contents

Other manuals for Fujitsu ETERNUS DX100 S3

Related product manuals