EasyManua.ls Logo

Fujitsu ETERNUS DX100 S3 - I;O Module; Drive; Figure 115 I;O Module Installation Order

Fujitsu ETERNUS DX100 S3
207 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
I/O Module
This section describes the standard installation rules for I/O modules.
By installing I/O modules, the drive enclosure can connect with other enclosures even if drives are
not installed.
Installation Order
Install IOM#0 first, and then install IOM#1.
Figure 115 I/O Module Installation Order
Rear view of a drive enclosure
I
/O module 0 (IOM#0) I/O module 1 (IOM#1)
Drive
This section explains the installation rules for drives.
The supported drives vary between the
ETERNUS DX100 S4/DX200 S4 and the ETERNUS DX100 S3/
DX200 S3. For details about drives, refer to "Overview" of the currently used storage systems.
Drives for High-Density Drive Enclosures
The installation priority order for drives in high-density drive enclosures is shown below.
1 3.5" SSDs for high-density drive enclosures (1.6TB)
2 3.5" SSDs for high-density drive enclosures (1.92TB)
3 3.5" SSDs for high-density drive enclosures (3.84TB)
4 3.5" SAS disks for high-density drive enclosures (1.2TB/10krpm)
5 3.5" Nearline SAS disks for high-density drive enclosures (2TB/7.2krpm)
6 3.5" Nearline SAS disks for high-density drive enclosures (3TB/7.2krpm)
7 3.5" Nearline SAS disks for high-density drive enclosures (4TB/7.2krpm)
8 3.5" Nearline SAS disks for high-density drive enclosures (6TB/7.2krpm)
9 3.5" Nearline SAS disks for high-density drive enclosures (8TB/7.2krpm)
10 3.5" Nearline SAS disks for high-density drive enclosures (10TB/7.2krpm)
11 3.5" Nearline SAS disks for high-density drive enclosures (12TB/7.2krpm)
12 3.5" Nearline SAS disks for high-density drive enclosures (14TB/7.2krpm)
13 3.5" Nearline SAS self encrypting disks for high-density drive enclosures (4TB/7.2krpm)
14 3.5" Nearline SAS self encrypting disks for high-density drive enclosures (8TB/7.2krpm)
15 3.5" Nearline SAS self encrypting disks for high-density drive enclosures (12TB/7.2krpm)
5. Hardware Configurations
Standard Installation Rules
188
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems
Design Guide (Basic)
Copyright 2023 Fujitsu Limited
P3AM-7642-32ENZ0

Table of Contents

Other manuals for Fujitsu ETERNUS DX100 S3

Related product manuals