Fujitsu ETERNUS DX100 S3 - Event Notification; Figure 43 Event Notification; Table 27 Levels and Contents of Events that Are Notified

•
When the ETERNUS DX
is rebooted, the performance monitoring process is stopped.
•
If performance monitoring is started from ETERNUS SF Storage Cruiser, ETERNUS Web GUI or
ETERNUS CLI cannot stop the process.
•
If performance monitoring is started from ETERNUS Web GUI or ETERNUS CLI, the process
can be stopped from ETERNUS SF Storage Cruiser.
Event Notification
When an error occurs in the ETERNUS DX, the event notification function notifies the event infor-
mation to the administrator. The administrator can be informed that an error occurred without
monitoring the screen all the time.
The methods to notify an event are e-mail, SNMP Trap, syslog, remote support, and host sense.
Figure 43 Event Notification
SNMP
manager
Mail
server
Syslog server
Remote
support
center
REMCS
Host sense
Server (host)
SyslogSNMP Trap E-mail
ETERNUS DX
The notification methods and levels can be set as required.
The following events are notified.
Table 27 Levels and Contents of Events That Are Notified
Level Level of importance Event contents
Error Maintenance is necessary Component failure, temperature error,
end of battery life (*1), rebuild/copy-
back, etc.
Warning Preventive maintenance is
necessary
Module warning, battery life warning
(*1), etc.
Notification (information) Device information Component restoration notification,
user login/logout, RAID creation/dele-
tion, storage system power on/off, firm-
ware update, etc.
*1: Battery related events are notified only for the ETERNUS DX100 S4/DX200 S4.
2. Basic Functions
Operation Management/Device Monitoring
82
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems
Design Guide (Basic)
Copyright 2023 Fujitsu Limited
P3AM-7642-32ENZ0