Fujitsu ETERNUS DX100 S3 - Number of Processes that Can be Executed Simultaneously; Capacity that Can be Processed Simultaneously

*13: EC/REC can be performed (The motor-off state of Eco-mode will be stopped).
OPC/QuickOPC/SnapOPC/SnapOPC+ cannot be performed (the
ETERNUS DX returns an er-
ror).
Number of Processes That Can Be Executed Simultaneously
The following upper limits are applied to the number of processes that are to be executed.
•
Only one process can be executed with Logical Device Expansion (LDE). Two or more processes
cannot be executed simultaneously in the same device.
•
A total number of 32 processes can be executed simultaneously for TPV balancing, FTRP balanc-
ing, RAID Migration, Flexible Tier Migration, and Non-disruptive Storage Migration.
Capacity That Can Be Processed Simultaneously
The following upper limit is applied to the capacity of processes that are to be executed.
•
A total capacity of
128TB can be processed simultaneously for TPV balancing, FTRP balancing,
RAID Migration, Flexible Tier Migration, and Non-disruptive Storage Migration.
A. Function Specification List
Combinations of Functions That Are Available for Simultaneous Executions
205
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems
Design Guide (Basic)
Copyright 2023 Fujitsu Limited
P3AM-7642-32ENZ0