Fujitsu ETERNUS DX100 S3 - Function Specification List; List of Supported Protocols; Table 57 List of Supported Protocols

A. Function Specification List
This appendix shows the combinations of functions that can be executed at the same time and the
targets for each function.
List of Supported Protocols
Table 57 List of Supported Protocols
Item
LAN for Operation
Management
iSCSI (SAN) Ethernet (NAS)
Operation mode 1000BASE-T/
100BASE-TX/
10BASE-T
10GBASE-SR/
10GBASE-CR/
10GBASE-T/
1000BASE-T
10GBASE-SR/
10GBASE-CR/
1000BASE-T
ETERNUS Web GUI http
¡
´ ´
https (SSL v3, TLS)
¡
´ ´
ETERNUS CLI SSH v2
¡
´ ´
telnet
¡
´ ´
ftp (client)
¡
´ ´
SMI-S http / https
¡
´ ´
SLP
¡
´ ´
NTP (time) NTP v4
¡
´ ´
E-mail SMTP (Client)
¡
´ ´
SNMP SNMP v1, v2c, v3
¡
´ ´
Event notification and audit
log sending
Syslog
¡
´ ´
KMIP (key management) SSL
¡
´ ´
Ping ICMP
¡ ¡ ¡
Network address IPv4, IPv6
¡ ¡ ¡
Routing RIP v1, v2, RIPng
´ ´
¡
File sharing (common) FTP/FXP
´ ´
¡
File sharing (UNIX/Linux) NFSv2, v3, v4.0
´ ´
¡
File sharing (Windows) CIFS (SMB1.0, 2.0, 3.0)
´ ´
¡
Authentication Kerberos v5
´ ´
¡
RADIUS
¡
´ ´
CHAP
´
¡
´
¡: Supported ´: Not supported
199
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems
Design Guide (Basic)
Copyright 2023 Fujitsu Limited
P3AM-7642-32ENZ0