EasyManua.ls Logo

Fujitsu ETERNUS DX100 S3 - Table 41 Volumes that Are to be Created Depending on the Selection of Deduplication and Com- Pression; Table 42 Deduplication;Compression Setting for Tpps Where the Target Volumes Can be Created

Fujitsu ETERNUS DX100 S3
207 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Deduplication is performed for Deduplication/Compression Volumes within the same TPP. Dedu-
plication is not performed for data in different TPPs. In some cases, deduplication might not be
performed even within the same TPP.
To enable the Deduplication/Compression function for existing volumes, use the RAID Migration
function.
Volumes that are to be created and the Deduplication/Compression setting for TPPs where the tar-
get volumes can be created vary depending on the selection of "Deduplication" and "Compres-
sion".
Volumes that are to be created
Table 41 Volumes That Are to Be Created depending on the Selection of "Deduplication" and "Com-
pression"
Condition
Volumes that are to be created
Deduplication Compression
Enable Enable Deduplication/Compression Volumes where both De-
duplication and Compression are enabled
Enable Disable Deduplication/Compression Volumes where only Dedu-
plication is enabled
Disable Enable Deduplication/Compression Volumes where only Com-
pression is enabled
Disable Disable TPVs for SAN where both Deduplication and Compres-
sion are disabled
Deduplication/Compression setting for TPPs where the volumes can be created
Table 42 Deduplication/Compression Setting for TPPs Where the Target Volumes Can Be Created
Condition Deduplication/Compression setting for the destination TPP
Deduplication Compression
Only Deduplica-
tion is enabled
Only Compres-
sion is enabled
Both Deduplica-
tion and Com-
pression are ena-
bled
Both Deduplica-
tion and Com-
pression are dis-
abled
Enable Enable
´ ´
¡
´
Enable Disable
¡
´ ´ ´
Disable Enable
´
¡
´ ´
Disable Disable
¡ ¡ ¡ ¡
¡: Volumes can be created
´: Volumes cannot be created
TPPs with the Deduplication/Compression function enabled have one of the following attributes:
deduplication/compression, deduplication only, or compression only. The Deduplication/
Compression Volume conforms to the attribute of the TPP where the volume is created. TPVs
where the Deduplication/Compression function is enabled and disabled can exist together within
each TPP.
Deduplication/Compression System Volumes
The following internal volumes are created for each TPP where the Deduplication/Compression
function is enabled.
3. SAN Functions
Operations Optimization (Deduplication/Compression)
115
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems
Design Guide (Basic)
Copyright 2023 Fujitsu Limited
P3AM-7642-32ENZ0

Table of Contents

Other manuals for Fujitsu ETERNUS DX100 S3

Related product manuals