Fujitsu ETERNUS DX100 S3 - Table 48 Volume Types that Can be Used with Veeam Storage Integration

•
Veeam Storage Integration supports the following volumes.
Table 48 Volume Types That Can Be Used with Veeam Storage Integration
Volume type Copy source Copy destination
Standard
¡
´
WSV
¡
´
TPV ¡ (*1) ¡ (*1)
FTV
¡ ¡
SDV
´ ´
SDPV
´ ´
¡: Supported ´: Not supported
*1 : Deduplication/Compression Volumes (TPVs) are not supported.
•
Copy destination TPVs
/FTVs are automatically created when snapshots are created with
Veeam Backup & Replication (*2).
*2 : Copy destination TPVs/FTVs are automatically created in the following TPPs/FTRPs.
- If the copy source volume is a Standard volume or a WSV, the TPP with the smallest
number in the
ETERNUS DX or if no TPP exists, the FTRP with the smallest number in
the ETERNUS DX
- If the copy source volume is a TPV/FTV, the same TPP/FTRP as the copy source
Copy destination TPVs/FTVs can also be created in any TPP/FTRP using ETERNUS CLI.
3. SAN Functions
Server Linkage Functions
142
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems
Design Guide (Basic)
Copyright 2023 Fujitsu Limited
P3AM-7642-32ENZ0