EasyManua.ls Logo

Fujitsu ETERNUS DX100 S3 - Operations Optimization (Virtualization;Automated Storage Tiering); Thin Provisioning

Fujitsu ETERNUS DX100 S3
207 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operations Optimization (Virtualization/Automated Stor-
age Tiering)
A single controller configuration differs from a dual controller configuration in the following
ways:
The Thin Provisioning function cannot be used.
The Flexible Tier function cannot be used.
Thin Provisioning
The Thin Provisioning function has the following features:
Storage Capacity Virtualization
The physical storage capacity can be reduced by allocating the virtual drives to a server, which
allows efficient use of the storage capacity. The volumes more than the capacity of all the instal-
led drives can be allocated by setting the capacity required for virtual volumes in the future.
TPV Balancing
I/O access to the virtual volume can be distributed among the RAID groups in a pool, by relocat-
ing and balancing the physical allocation status of the virtual volume.
TPV/FTV Capacity Optimization (Zero Reclamation)
Data in physically allocated areas are checked in blocks and unnecessary areas (areas where 0 is
allocated to all of the data in each block) are released to unallocated areas.
2. Basic Functions
Operations Optimization (Virtualization/Automated Storage Tiering)
41
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems
Design Guide (Basic)
Copyright 2023 Fujitsu Limited
P3AM-7642-32ENZ0

Table of Contents

Other manuals for Fujitsu ETERNUS DX100 S3

Related product manuals