Fujitsu ETERNUS DX100 S3 - Figure 117 Installation Diagram for 2.5 Drives

11 2.5" self encrypting SSDs (400GB)
12 2.5" self encrypting SSDs (800GB)
13 2.5" self encrypting SSDs (1.6TB)
14 2.5" self encrypting SSDs (1.92TB)
15 2.5" self encrypting SSDs (3.84TB)
16 2.5" self encrypting SSDs (7.68TB)
17 2.5" SAS disks (300GB/15krpm)
18 2.5" SAS disks (600GB/15krpm)
19 2.5" SAS disks (900GB/15krpm)
20 2.5" SAS disks (300GB/10krpm)
21 2.5" SAS disks (600GB/10krpm)
22 2.5" SAS disks (900GB/10krpm)
23 2.5" SAS disks (1.2TB/10krpm)
24 2.5" SAS disks (1.8TB/10krpm)
25 2.5" SAS disks (2.4TB/10krpm)
26 2.5" SAS self encrypting disks (900GB/10krpm)
27 2.5" SAS self encrypting disks (1.2TB/10krpm)
28 2.5" SAS self encrypting disks (2.4TB/10krpm)
29 2.5" Nearline SAS disks (1TB/7.2krpm)
30 2.5" Nearline SAS disks (2TB/7.2krpm)
According to the installation order, install drives in the slots of a controller enclosure from Slot#0
to Slot#23 in ascending order. Then, install drives in the slots of a drive enclosure from Slot#0 to
Slot#23 in ascending order.
Figure 117 Installation Diagram for 2.5" Drives
Slot#8
Slot#9
Slot#10
Slot#11
Slot#12
Slot#13
Slot#14
Slot#15
Slot#0
Slot#1
Slot#2
Slot#3
Slot#4
Slot#5
Slot#6
Slot#7
Slot#16
Slot#17
Slot#18
Slot#19
Slot#20
Slot#21
Slot#22
Slot#23
5. Hardware Configurations
Standard Installation Rules
190
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems
Design Guide (Basic)
Copyright 2023 Fujitsu Limited
P3AM-7642-32ENZ0