Powering off sequence
1 Shutdown of all the servers
2 Shutdown of all the server UPS units
3 Issuance of command to turn off the
ETERNUS DX from the power synchronized unit
4 ETERNUS DX shutdown
Refer to the manual that is provided with a power synchronized unit for details about connection
configurations with power synchronized units and required settings.
Power Synchronized Connections (Wake On LAN)
By using Wake On LAN, an instruction to power on the storage system can be issued via the LAN.
"Magic packet" is sent by the utility software for Wake On LAN. The
ETERNUS DX detects this
packet and the power is turned on.
Figure 103 Power Supply Control Using Wake On LAN
Administration
Terminal
LAN
MNT
MNT
E
TERNUS DX
CM#0
CM#1
2
1
Powering on sequence
1 A power on instruction is issued to the
ETERNUS DX via the LAN.
2 ETERNUS DX startup
4. Connection Configuration
Power Synchronized Connections
169
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems
Design Guide (Basic)
Copyright 2023 Fujitsu Limited
P3AM-7642-32ENZ0
To Next Page
Loading...
