Fujitsu Eternus DX600 S3 - Appendix C User Roles and Policies; Roles

ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
1014
Appendix C
User Roles and Policies
This appendix describes user roles and policies.
C.1 Roles
When creating a user account, at least one role must be applied.
There are two types of roles: a default role and a custom role. The default role is already prepared in the
ETERNUS DX and the custom role can be managed by the user.
■ Default Role
Use the default roles for normal operation. Default roles cannot be deleted. The default role settings cannot
be changed.
The following table shows the default roles and policies that are applied to each default role.
OK: Available
NG: Not available
*1: "Software" is the role that is used for external software. A user account with the "Software" role cannot log in to ETER-
NUS Web GUI.
Policies Default Roles
Monitor Admin Storage
Admin
Account
Admin
Security
Admin
Main-
tainer
Software
(*1)
Status Display OKOKOKNGOKOKNG
RAID Group Management NG OK OK NG NG OK NG
Volume - Create / Modify NG OK OK NG NG OK NG
Volume - Delete / Format NG OK OK NG NG OK NG
Host Interface Management NG OK OK NG NG OK NG
NAS Management NG OK OK NG NG OK NG
Advanced Copy Management NG OK OK NG NG OK NG
Copy Session Management NG OK OK NG NG OK NG
Storage Migration Management NG OK OK NG NG OK NG
Storage Management NG OK NG NG NG OK NG
User Management NG OK NG OK NG NG NG
Authentication / Role NG OK NG OK NG NG NG
Security Setting NG OK NG NG OK NG NG
Maintenance Information NG OK NG NG OK OK NG
Firmware Management NG OK NG NG NG OK NG
Maintenance Operation NG NG NG NG NG OK NG