Fujitsu Eternus DX600 S3 - Chapter 1 System Management

ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
24
Chapter 1
System Management
This chapter describes system management.
When using functions in the Action area, select the desired function from the Action area that is displayed in
the status display screen.
The functions in the Action area for System can be performed from the following display functions:
Functions in the Action area for System Display function
Initial Setup
• System (Basic Information)
Change User Password
• System (Basic Information)
Set SSH Public Key
• System (Basic Information)
System Settings –
Modify Storage System Name
• System Settings
Modify Date and Time
Change Box ID
Setup Subsystem Parameters
Setup Encryption Mode
Setup SMI-S Environment
Register SED Authentication Key
Setup Power Management
Setup Extreme Cache
Setup Exclusive Read Cache
Setup Disk Drive Patrol
Setup Debug Mode
Utility Management –
Shutdown/Restart Storage System
• Utility
Backup Configuration
Export Configuration
Start/Stop Performance Monitoring
Clear Cache
Eco-mode Management –
Modify Eco-mode General Setting
• Eco-mode
Create Eco-mode Schedule
Delete Eco-mode Schedule
Modify Eco-mode Schedule