Fujitsu Eternus DX600 S3 - Delete Role; Modify Role

Chapter 1 System Management
1.7 User Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
95
1.7.5 Delete Role
This function deletes the user role (custom role) which was registered by a user.
The procedure to delete a role is as follows:
Procedure
1 Select the user role to be deleted (multiple selections can be made) and click [Delete Role]
in [Action].
 A confirmation screen appears.
2 Click the [OK] button.
 The user role is deleted.
3 Click the [Done] button to return to the [Define Role] screen.
End of procedure
1.7.6 Modify Role
This function modifies the policies of the user-specific role (custom role).
• The existing role (default role) cannot be deleted.
• The user role which is allocated to a user account cannot be deleted.
• Policies of the existing role (default role) cannot be changed.
• Policies which have been granted to the user account while logged in, can also be modified. Note that
the modifications become valid only after the next login.
• A role without any policies cannot be created.
• The [Modify Role] function can be used when a custom role is created.