Fujitsu Eternus DX600 S3 - A.4.6 Host-LU Qos Management

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
878
● Test Unit Ready Command Settings
● Sense Settings
● Other Settings
A.4.6 Host-LU QoS Management
A.4.6.1 Set Host-LU QoS
For details about this function, refer to "4.7.3 Set Host-LU QoS" (page 482).
● Select LU QoS Group
• Select LU QoS Group
Refer to "Test Unit Ready Command Settings" (page 873) in "Add Host Response" (page 870) for details.
Refer to "Sense Settings" (page 873)
in "Add Host Response" (page 870) for details.
Refer to "Other Settings" (page 875) in "Add Host Response" (page 870) for details.
Description This function selects an LU QoS group number to assign to a "Host - CA port - LUN group".
Input condition/
Display contents
LU QoS Group No.