Fujitsu Eternus DX600 S3 - Delete Thin Provisioning Pool

Chapter 6 Thin Provisioning Pool Management
6.3 Delete Thin Provisioning Pool
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
568
6.3 Delete Thin Provisioning Pool
This function deletes a Thin Provisioning Pool.
The procedure to delete a Thin Provisioning Pool is as follows:
Procedure
1 Select the TPP to be deleted (multiple selections can be made) and click [Delete] in
[Action].
 A confirmation screen appears.
2 Click the [OK] button.
 Delete Thin Provisioning Pool starts.
3 Click the [Done] button to return to the [Thin Provisioning Pool] screen.
End of procedure
TPPs that have volumes registered cannot be deleted. When deleting a TPP, delete the volumes beforehand.
To delete a volume, refer to "3.2 Delete Volume" (page 272)
.
After deleting a TPP, all the RAID groups that configure the TPP are also deleted.