Appendix B Factory Default List
B.6 Advanced Copy Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
1009
B.6 Advanced Copy Management
This section provides information on the default parameters of the following actions for Advanced Copy
management.
• Register Advanced Copy License
• Modify EC/OPC Priority
• Modify Copy Table Size
• Modify Copy Parameters
• Set Copy Path
• Modify REC Buffer
• Create REC Disk Buffer
• Modify REC Multiplicity
• Set REC Bandwidth Limit
• ODX
• Create ODX Buffer Volume
■ Register Advanced Copy License
*1: This item is displayed only for the ETERNUS DX60 S3/DX100 S3/DX200 S3 and the ETERNUS DX200F.
■ Modify EC/OPC Priority
Screen Setting item Default value
License Settings Registration Method (*1) Use License Key
Screen Setting item Default value
EC/OPC Priority EC/OPC Priority Automatic Priority
Advanced Setting Copy Schedule Mode Session Balancing
To Next Page
Loading...
