Fujitsu Eternus DX600 S3 - Delete Host Response

Chapter 4 Connectivity Management
4.5 Host Response Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
473
The main setting items are as follows.
● Host Response Name
• Name
● ALUA Settings
• Asymmetric / Symmetric Logical Unit Access
• TPGS Mode
• TPG Referrals Mode
3 Click the [Add] button.
 A confirmation screen appears.
4 Click the [OK] button.
 Addition of the host response starts.
5 Click the [Done] button to return to the [Host Response] screen.
End of procedure
4.5.2 Delete Host Response
This function deletes a host response.
The procedure to delete a host response is as follows:
Procedure
1 Select the host response to be deleted (multiple selections can be made) and click [Delete
Host Response] in [Action].
 A confirmation screen appears.
If an error screen appears under the following conditions, check the parameter settings.
• The "Name" is not entered
• The "Name" does not satisfy the input conditions
• The "Name" matches with an existing host response name
• A host response that is being used cannot be deleted. In this case, release the assignment from the host
groups or the hosts before performing this function.
• The recommended pattern and the default setting of the host response cannot be deleted.